To attach and set your Automatic Swing Trainer please follow these steps:

STEP 1 - To properly attach the device you will want to place it over your belt buckle.

STEP 2 - To turn the device on simply ‘tap’ any one of the 3 buttons until you hear a beep.

STEP 3 - Now, put your pinky finger of your left hand through the ringlet.  If you are left handed this will be right pinky finger.

STEP 4 - To set position 1 or the 7:30 position press and hold the number 1 button until you here the second acknowledgement ‘beep’. 

STEP 5 - After you hear the acknowledgement beep grip the club and swing your arms back until your left arm reaches the 7:30 position.  Hold perfectly still for about 3 seconds until you hear the acknowledgement beep again.  This position is now set.

STEP 6 - Repeat this process for position 2, the 9 o’clock position, or when your arm is parallel to the ground.

STEP 7 - Repeat this process for position 3, the 10:30 position, or when you are just slightly short of your full swing.

STEP 8 - The device is now set and you will never have to set it again unless you want to change one position, or all three.

STEP 9 - For the most accurate setting of the positions use a mirror to confirm your different length backswings